www.mhlnews.com is using a security service for protection against online attacks. This process is automatic. You will be redirected once the validation is complete.
d9826738744aeff9132fd6d3a235826a | 20.192.13.255 | 09/30/2022 12:09 PM UTC |
Protected by StackPath
This load plan is intended for general informati<strong>on</strong> purposes <strong>on</strong>ly and is not recommended for any specific cargo. Other Carriers are not required to accept this load plan or any plan suggested by Uni<strong>on</strong> Pacific Railroad. This informati<strong>on</strong> is offered to shippers to assist in understanding the rail envir<strong>on</strong>ment, the shipper is ultimately resp<strong>on</strong>sible for choosing how best to package, block and brace its cargo to avoid damage to the cargo and rail equipment. <str<strong>on</strong>g>Double</str<strong>on</strong>g> <str<strong>on</strong>g>Stacked</str<strong>on</strong>g> <str<strong>on</strong>g>Drums</str<strong>on</strong>g> <strong>on</strong> <strong>Pallets</strong> <strong>with</strong> <strong>Ty</strong>-<strong>Gard</strong> 20ft C<strong>on</strong>tainers Page Nose Side Wall Cutaway View Rear Nose <strong>Ty</strong>-gard used a l<strong>on</strong>gitudinal restraint. Each strip of <strong>Ty</strong>-gard will restrain approx. 8,800lbs 232” (interior length) Overhead View <strong>Ty</strong>-<strong>Gard</strong> <strong>Ty</strong>-<strong>Gard</strong> <strong>Ty</strong>-<strong>Gard</strong> <strong>Ty</strong>-<strong>Gard</strong> 1/2” plywood vertical sheet between drums and <strong>Ty</strong>- <strong>Gard</strong> strips – tape barrier to plywood to prevent dropping Rear 92 in. <str<strong>on</strong>g>Drums</str<strong>on</strong>g> must be unitized to the pallet (See diagram below) Uni<strong>on</strong> Pacific Damage Preventi<strong>on</strong> File: <str<strong>on</strong>g>Drums</str<strong>on</strong>g>20 Pallet TYGARD Date: 11/04/2003 By: PJS
- Page 2 and 3: This load plan is intended for gene
- Page 4 and 5: Unitized Drums on
Ty-Gard 2000
Cargo Restraint Systems
Introduction
Ty-Gard 2000 has become one of the most powerful load containment systems in the market. This securing system guard many types of products, from IBC’s, drums, explosives and all sorts of palletized loads.
Preventing Damage during freight, with a system tested and approved to secure cargo by international standards and guidelines. These 40cm wide bands are flexible and made of more than 7800 high resistance multi-fibers.
View Brochure
APPROVED TO SECURE DANGEROUS GOODS
Tested to transport dangerous and general loads under both the AAR and the BOE.
COMPLIANT WITH INTERNATIONAL STANDARDS
Ty-Gard 2000 is in line with the following standards: IMDG, FMCSA, USCG, RID, ADR.
Ty-Gard 2000 | 152.4 m/reel | 27 u./pallet |
Ty-Patch | 76.2 m/reel | 12 u./pallet |
Ty-Gard Tool Kit | It includes ratchet and roll |
Barrow Ty-Gard | Optional purchase |
STEP 1 – CUT AND PLACE | Cut two lengths of Ty-Gard and one 5ft length of Ty-Patch for each band required. |
STEP 2 – BOND | Adhere Ty-Gard to the sidewall in predetermined locations, following corrugations, roll each adhesive section firmly with bonding roller. |
STEP 3 – TENSION | Overlap Ty-Gard lengths, insert Ty-Tool and tension. |
STEP 4 – PATCH | Place Ty-Patch across tensioned Ty-Gard band and firmly roll with bonding roller. |