How to program 2014 jeep wrangler key fob

Have all keys for the Dodge/Chrysler/Jeep ready – You must have two working programmed or original keys to use this procedure.
Your new keys must be cut prior to performing this procedure.
Remote portion and immobilizer are programmed during the same programming procedure.
Please note: this programming procedure WILL NOT WORK if your vehicle has PUSH BUTTON ignition.
1. Insert first programmed key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turn ignition to OFF and remove key.
2. Within 15 seconds of removing first key insert second programmed key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key.
3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 secondsyou should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming iscompleted.
4. For each additional key you must repeat these steps starting with step number 1.

Easy to Follow Step-by-step Key fob remote Programming Instructions

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2014 Jeep Wrangler

Time needed: 5 minutes.

1. Insert First Programmed Key

   INSERT a working remote head key into the Ignition and TURN it to the ON/RUN position.

2. Remove First Programmed Key

   WITHIN 3-15 seconds, TURN the Ignition back to the OFF/LOCK position and REMOVE the key.

3. Insert Second Programmed Key

   INSERT a second working remote head key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the vehicle will chime to indicate successful entry into Programming Mode.

4. Remove Second Programmed Key

   TURN the second working remote head key to the OFF/LOCK position and REMOVE it from the Ignition.

5. Program Remote

   INSERT the NEW remote head key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the vehicle security light will STOP flashing. It will FLASH again to indicate successful programming of this remote head key.

6. Program Additional Remote

   REPEAT Step 5 to program any additional remotes to your vehicle.

7. Exit Programming Mode

   TURN Ignition to OFF/LOCK and REMOVE key to EXIT Programming Mode.

8. Test Remotes

   TEST all remotes. Programming is complete.

9. Share

   If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

• Verify the following prior to following these instructions:
  • Your vehicle is equipped with keyless entry, and
  • You have a key fob remote that is compatible with your vehicle.
• Obtain ALL remote transmitters for this vehicle.
• You MUST have at least TWO working remote head keys in order for this procedure to work.
• If you don’t have at least TWO working remote head keys, you MUST have the remote programmed by an Automotive Locksmith.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2014 Jeep Wrangler

MONEY BACK GUARANTEE

We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.

FAST & FREE SHIPPING

ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!

CUSTOMER SUPPORT

Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.

SAVE 70% OVER DEALERSHIPS

We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!

NorthCoast Keyless Free Programming Instructions Disclaimer:

• We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
• If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.