-
Open the side of the refrigerator with the water filter.
-
Pull the water filter cover out.
-
The water filter cover will click when it is pulled out the required length.
-
Pull the water filter cover down.
-
Turn the water filter 90 degrees counter clockwise.
-
Remove the water filter.
-
You can not pull the water filter out unless it has been fully rotated counter clockwise.
-
Wipe away any water that leaked during the removal of the water filter.
-
Insert the new water filter.
-
Turn the water filter 90 degrees clockwise to secure in place.
-
The water filter will not move when it is fully turned.
-
Raise the water filter cover up.
-
Slide the water filter cover back into place.
-
The water filter cover will click when it is pushed in completely.
-
Dispense water over the course of five minutes in cycles of 30 seconds ON and 60 seconds OFF.
-
Do not dispense water continuously for five minutes.
-
Completing this step will remove air from the water system and reduce fine particles from the new water filter.
-
Press and hold the Accela Ice button icon for three seconds to turn the indicator light off.
-
Discard any ice produced within the first 24 hours.