How much does a ton of 57 stone cost

Crushed stone and gravel costs in bulk are typically $10 to $50 a tonne, depending on the kind. It costs between $18 and $30 per tonne of road base, and it costs between $28 and $45 per tonne of ordinary pea gravel or limestone. Purchasing gravel in modest amounts might cost more than $100 per tonne of material. Per cubic yard of stone, 1.4 tonnes of stone are required.

In light of this, what is the cost of a tonne of 57 stone?

#57 Granite Gravel—-$52 per tonne of crushed stone Gravel for use in building, driveways, and drainage systems.

Second, what kind of gravel is the most suitable for a driveway?

In addition to numerous kinds of gravel in various colours to fit your aesthetic requirements, top layer options for gravel driveways may include crushed shale, limestone, granite, and concrete, among other materials.

It’s also useful to know how much a load of gravel for a driveway costs.

Depending on the rock type, amount bought, and delivery costs, gravel pricing for a driveway may vary from $10 to $50 per tonne or $15 to $75 per yard. When shipping, spreading, and compacting are included in, driveway stone and rock installation costs between $100 and $120 every tonne installed.

What is the value of a tonne of rock?

Pricing for Landscaping Rock and Stone

Price for Rock of a Certain Type

Boulders that are rather large

Bull prices range from $100 to $600 per tonne.

$37 per cubic yard of material Bags are $4 each. $5.00 for a 5-gallon bucket of water

River Rock Gravel is a kind of gravel found in rivers and streams.

Approximately $40-$45 per tonne The cost of a cubic yard is $30 to $35. Bags cost between $4 and $8 each.

Stone, rock, and shells that have been crushed

$50 to $65 per metric tonne Per cubic yard, prices range from $40 to $55.

There were 38 related questions and answers found.

Do you know how much it costs to rent a dump truck full with gravel?

Based on the kind of rock, volume, and distance travelled by the truck, the cost of gravel may vary from $10 to $50 per tonne, $15 to $75 per yard, $1 to $3 per square foot, or $1,350 per truck load. Delivery is provided up to a distance of ten miles.

What is the grain size of #57 gravel?

Concerning #57 Limestone Gravel Size of #57 Stone is 1 inch or less in circumference. Florida residents are most likely to encounter #57 Stone as their driveway gravel. #57 Stone is a kind of drainage gravel that is often used. #57 Stone is also used as a basis for retaining walls and driveways, as well as in the mixing of concrete and asphalt.

1 tonne of 57 gravel covers about how many square feet?

Approximately 60 square feet at 4″ deep, 80 square feet at 3″ deep, and 120 square feet at 2″ deep are covered by one tonne of #57 gravel. #57 Gravel Coverage:

What is the weight of a dump truck in tonnes?

According to industry standards, transfer dump trucks can handle between 26 and 27 short tonnes of aggregate (23.6 and 24.5 t; 23.2 and 24.1 long tonnes) each load, and each vehicle is capable of hauling 3–5 loads per day, on average.

What is the size of stone #67?

#67. Crushed stone #67 is comprised of stones that are 3 inches or less in size. A wonderful material for road and slab foundation, as well as fill, this is a terrific choice.

What is the least expensive material to use for a driveway?

Aggregate is the least expensive of the four basic driveway materials when measured pound for pound. A simple gravel driveway may be built for as low as $0.50 per square foot, which is orders of magnitude less expensive than an asphalt, stone, or concrete driveway that has been professionally completed.

What is the approximate number of tonnes of gravel I will require?

The dimensions are as follows: length in feet x width in feet x depth in feet (inches divided by 12). Divide the sum by 21.6 to get the answer (the amount of cubic feet in a ton). The final value will be an estimate of the number of tonnes that will be needed.

What is Type 2 gravel, and how does it differ from Type 1 gravel?

A graded aggregate consisting mostly of crushed stone and/or crushed concrete, as well as sand and gravel, is used. Granular sub base or back-fill is used in this application. Type II compacts really nicely. Quantity of Type II. Sands, soils, and gravel are included together in this category.

What is the proper name for driveway gravel?

When it comes to gravel, it is normally graded by size, and most driveways employ at least three different sizes of gravel that are laid down in layers to provide a stable foundation and adequate drainage for the road. It is also known as “clean stone,” and it is a kind of base gravel that is created from machine-crushed stone and contains irregular rock particles.

What size gravel do I need for my driveway? How much gravel do I need?

Driveway gravel, on the other hand, should be somewhat big in diameter, ranging between 3/8 and 3/4 inch in diameter, as compared to the gravel used for pathways, which is normally 1/4 to 3/8 inch in diameter. Another issue to consider is the quantity of extremely minute granular particles in the gravel, which is referred to as “fines.”

Is it permissible to place gravel over grass?

It is possible to place the barrier directly on top of the grass, eliminating the need to mow. It’s important to remember what the gravel is supposed to support. Because of the weight of the trucks, at the very least a foundation layer of bigger stone is required underneath the gravel. Underneath the stone, place the dirt barrier.

What is the greatest kind of material to use for a driveway?

The five finest materials to use when paving your driveway with exposed aggregate are as follows: Decorative concrete is created by removing a small layer of concrete from the top of freshly built concrete to show the pebbles, shells, stones, and/or sand that have been placed near the surface. Concrete. Pavers made of bluestone. Pavers made of clay bricks. Timber sleepers are used for this purpose.

What is the best method to calculate gravel for a driveway?

Take a foot measurement of the length and breadth of your driveway. Surface area is calculated by multiplying the length by the breadth and dividing the result by three since four inches equals one-third of a foot. You now have an estimate of the amount of gravel required in cubic feet. In order to convert a volume in cubic feet to a cubic yard, multiply the amount in cubic feet by 27.

How many yards of #57 stone are in a ton?

How many tons of 57 stone do I need?

How much is a ton in rock?

How many yards are in a ton of gravel?