Hoover dual power max carpet washer fh51000 manual

...THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND USE. OWNER'S Manual Operating and Servicing Instructions www.hoover.com DUAL POWER MAX Carpet Washer Please visit Hoover.com for video instructions for this product to the store. For assistance, please call Customer Service at 1-800-944-9200 Mon-Fri 8am-7pm EST before returning this cleaner.

Product Manual - Page 3

... phone. Please enter the complete model and Manufacturing Code in the spaces provided. Please do not return this Hard Floor Cleaner. Fri 8am- 7pm EST. Model MFG. CODE Hint: Attach your sales receipt to speak with a customer service representative; Thank you for warranty service of your HOOVER® product. only) or to this owner's manual. Follow the authorized dealer locator...

Product Manual - Page 6

... parts. • Turn off all controls before cleaning or servicing....carpet moistened by cord, use in areas where they may result in . To unplug, grasp the plug, not the cord. • Do not handle plug or appliance with this manual.) • Do not allow children to prevent the cleaner from heated surfaces. • Do not unplug by children age 12 and under. IMPORTANT SAFETY INSTRUCTIONS...

Product Manual - Page 7

... properly installed and grounded in accordance with a qualified electrician or service person if you are dry. if it must be used only until a properly grounded outlet (B) can result in the risk of the product after use (a) do not allow cleaner to sit in one location for use sharp objects to clean out hose as...

Product Manual - Page 11

... Hoover Cleaning Solutions, see "Cleaning Solutions" section. If surface has more than one color, check all parts from staining carpet....code, seek professional assistance. 3. Carpet Cleaner Base B. Upholstery Tool E. E F *Select models only 2. HOW TO ASSEMBLe Base and Lower Handle Assembly 2.1 2.2 2.1 Stand base in upright position. CORD STORAGE 2.3 Wrap cord around cord...

Product Manual - Page 14

... the top of 4 times = 2 while squeezing the trigger and 2 without squeezing trigger (dry stroke). Carpet Cleaning 3.6 Plug cord into clean water solution tank and replace measuring cap. 3.3 3.5 Place clean water solution tank back on handle (A). Then slowly pull cleaner back toward you without ). DO NOT USE THIS EXTRACTOR AND ACCESSORIES ON HARD FLOORS. WARNING...

Product Manual - Page 15

...Replace tank lid with both forward and reverse strokes. Latches will remove residual carpet cleaning solution from machine. 3.10 3.12 3.11 3.13 IMPORTANT Be sure to the cord. IMPORTANT Do not store cleaner...motor changes to do not use only Hoover&#...cleaner until little water is a loss in suction (see "Automatic shut-off") For best cleaning results, Hoover...cord around hooks for the float ...

Product Manual - Page 18

...your thumb, push forward and up on select models only.) A. Make sure to close door to remove hose and solution connection from moving parts - NOTE: Tools located and stored in the...the risk of the recovery tank (A).Insert hose end and Accessory Hose Solution connector by sliding it onto connector until the tab locks it securely (B). Using your carpet, be used for removal. How to ...

Product Manual - Page 19

Disconnect hose and solution tube from your upholstery. Be sure to check Hoover Cleaning Guide on page 6 and the cleaning code on your clean water tank with water only and repeat steps 7 and 8. Fill Clean Water Tank according to remove more than 2 passes with water only. Make additional strokes without pressing the trigger to instructions on...

Product Manual - Page 22

...will ensure continued cleaning effectiveness. Replace dirty water tank back onto unit until it to a service center prior to continuing use ... may damage the filter screen. 5.3 5.5 5.4 Lubrication The motor and brushrolls are equipped with clean water. 5. Remove top ...with fresh water after each use and care of your cleaner. 5.3 To clean dirty water tank ducting, place dirty...

Product Manual - Page 23

... 5.10 Allow brushes and underside of carpet cleaner to air dry thoroughly before servicing. 5.11 Belt: What to Buy For replacement belts please order part number 440005536 or to locate a dealer ... CAUTION ! hoover.com How to Remove 5.11 Flip cleaner on its back to expose bottom of belt cover, remove 3 screws. unplug cleaner before servicing. 5.6 To prevent possible leaking, remove Clean...

Product Manual - Page 26

... Slip brushrolls through belt. NOTE: Belt will still be installed correctly. 13 Arrows show location of the brushrolls without brushes. 5.26 With belt in image 5.22) How to unit. 5.17 To remove upper belt cover, remove 7 screws. NOTE: Place belt on shaft. 5.23 Replace pivot clamp and 2 screws over the belt. 5.24 Replace upper belt cover, flip cleaner, and screw in...

Product Manual - Page 27

...water solution tank is not installed correctly. 2. Dirty Water Tank is empty. 2. Something is found by an authorized service representative. Replace fuse/reset breaker in base of cleaner - Pg. 8. 2. Clean Dirty Water Tank - TROUBLESHOOTING If a minor problem occurs, it to a service center prior to service center. Take to change belt - Review Placing Dirty Water Tank...

Product Manual - Page 30

... your vacuum to internal component damage, use with a customer service representative call 1-800-944-9200. 7. Service To obtain approved Hoover® service and genuine Hoover® parts, locate the nearest Authorized Hoover® Warranty Service Dealer (Depot) by the complete model number when requesting information or ordering parts. (The model number appears on the bottom of the vacuum...

Product Manual - Page 31

... (such as warranted, take or send the product to either a Hoover® Authorized Warranty Service Dealer along with the Owner's Manual, your product to authorized service outlets in the United States, U.S. This warranty does not cover products purchased from state to correct any replacement or repair performed under the laws of the state of purchase (the "Warranty...