Most modern transmissions are automatic, and they change gears using hydraulic fluid. When the gear changes, the car’s computer will turn on the transmission solenoid, also known as a pressure control solenoid. We’re going to look at what happens when one of these fails. Replacing a single solenoid can cost you $ 50-$ 300. It can take between 2-4 hours, and there may be multiple solenoids to replace. A single solenoid costs $ 15-$ 100, and labor costs vary from $
50-$ 70 per hour. Many times, the solenoids will fail one by one and only need to be placed one at a time. Other times, the entire set will malfunction and need to be replaced en masse. If your experiencing transmission troubles and suspect the solenoids are at fault, you need to be prepared to replace all of them. Having your transmission fluid changed out regularly will prevent the solenoids from going bad so quickly and
ensure that you don’t have to come for repairs as often. Benefits of Pressure Control Solenoid ReplacementOnce you get this issue resolved, you can control your 2009 Chevrolet Impala much easier. You will be able to shift the gears without any problem and rely on your 2009 Chevrolet Impala to work like it is supposed to. Your 2009 Chevrolet Impala will be safer to drive and respond better to your actions. On top of that, you will preserve your transmission by getting the solenoid replaced since a malfunctioning solenoid can cause transmission damage over time. What Is Done during Pressure Control Solenoid Replacement?The mechanic will need to locate the solenoid, which is usually placed near the oil pan. He may need to remove the fluid compartment next to it to get at the solenoids and empty out the transmission fluid. The mechanic will place an oil pan nearby to catch the fluid as he removes the transmission fluid reservoir. Once that container is out of the way, he can access the solenoid. He will match up the solenoid with the corresponding electrical wire. He may need to replace one of them or all of them, depending on what has been damaged. Once the solenoid has been taken out, he can replace it with a new one and refill the transmission fluid and put the fluid container back in place. Then he will test your 2009 Chevrolet Impala to ensure that the transmission and gears are reworking as they should be. When to Get Pressure Control Solenoid ReplacementSince the solenoid is connected to the transmission and is required for changing gears when it malfunctions, it can cause unexpected gear changes, it may also refuse to shift or change gears, and there may be a delay in shifting gears. You may move the stick shift, but your 2009 Chevrolet Impala may not acknowledge that the gear was changed until seconds or minutes later. Your 2009 Chevrolet Impala may also refuse to move out of neutral gear. As you can imagine, it’s not wise to try to drive with this problem going on. Your 2009 Chevrolet Impala could escape your control as it shifts gears or refuses to shift gears, and you can get into an accident or become stranded. You are much better off just having your 2009 Chevrolet Impala towed when the solenoids start giving your transmission trouble. The solenoid will give out eventually, so you should have them checked after the first 10,000 miles and every year after that just to catch this kind of problem early. How to Save Money on Pressure Control Solenoid ReplacementIf you wanted to save on repair costs, doing the work yourself and replacing the solenoids on your own, then you can do that safely with little experience. You just have to be able to recognize a damaged solenoid and ensure you replace all the ones that are damaged. You’ll also need the tools to drain out the transmission fluid and access the solenoids. Another way to save on this repair is to just compare the rates that different mechanics charge for the work. They won’t all charge the same in parts and labor, so taking some time to compare the costs can shave off some of your expenses. Sample Pressure Control Solenoid Replacement Costs
Where is the transmission pressure control solenoid located?In most cases, solenoids are located inside of the oil pan, connected to the valve body. Depending on what you drive, the technician may be able to replace just the failed shift solenoid.
Can I replace transmission solenoid myself?Replacing a transmission shift solenoid can be done by most any auto repair shop, automobile dealership service center or you can do-it-yourself “DIY”.
How much does it cost to replace a transmission pressure control solenoid?The overall cost to replace the shift solenoid in an automatic transmission ranges from $200 to $500 for a single solenoid. If the damage requires you to replace the entire solenoid pack the cost increases to between $250 and $700.
|
2009 chevy impala transmission pressure control solenoid replacement
Related Posts
Copyright © 2024 ihoctot Inc.
