03-18-2013, 06:45 PM | #1 |
First Lieutenant Drives: E92 335I BSM Join Date: Feb 2007 Location: San Bruno CA | Oil filter housing gasket leaking oil....Dealer charging $965.00 to replace? are they serious? or are they dicking with me? isnt that just the gasket on the top part of the engine where the plastic oil filter cap meets the oil filter housing? that part is like .50 cents. this is BS right? __________________ Ordered 4-25-07 Delivered 7-20-07 E92 335i black sapphire metallic, sport, premium, and Navi. JB4, K&N Drop in, Matte Black Window Trim. Linea Corse Dyna 19x8.5F 19x10R Previous Ride: 2004 Silverstone 350Z enthusiast. APS TT *Built Motor* at 12PSI. 467rwhp and 413 rwtq. Tuned at ZCARGARAGE. (Missed, but never forgotten) |
03-18-2013, 06:57 PM | #2 |
Lieutenant General Drives: 335i cpe Join Date: Oct 2006 Location: ZSP/ZPP/ZCW | not sure but cousins diy'd on an E46. From what they explained it wasn't just the cap/housing, it was more than than... |
03-18-2013, 07:02 PM | #3 |
Lieutenant Drives: 08 335i e92 AW MT Join Date: Feb 2011 Location: Austin | 965? They must be trying to charge u to replace the oil filter housing and the oil cool gaskets separately. But you have to take the oil cooler gasket off to get to the oil filter housing. In terms of labor it should take a bmw tech no longer than 2 hours to do. It should take someone who has never done this before 4-6 hours. It's not impossible but if you can't do a brake job you can't do this. |
03-18-2013, 07:04 PM | #4 |
Lieutenant Drives: 2011 550i MSport Join Date: Mar 2013 Location: Greenwich, CT - South Florida | Quote: Originally Posted by MSimeon are they serious? or are they dicking with me? isnt that just the gasket on the top part of the engine where the plastic oil filter cap meets the oil filter housing? that part is like .50 cents. this is BS right? Yes that is BS... The gasket price is around 30 bucks from the dealership... There are plenty of DIY's for it... 900 bucks for the repair is ridiculous... If you don't go the diy option, check with your local mechanic for an estimate... here is a helpful diy ... Pretty simple job if you are mechanically inclined. //www.e90post.com/forums/showthread.php?t=476419 |
03-18-2013, 07:07 PM | #5 |
Brigadier General Drives: Alpine White '13 550i Join Date: Nov 2011 Location: Tarzana, CA | I got it done for $260 and yea its pretty serious unless you want oil all over the place. Here's a good way to figure out the prices yourself: See how much the item you need to repair is (in the case $50 for the gasket) then add the number of hours it'll take to fix it (usually around $100 an hour) I got it done for $260 but that's a really good price. And if your going to the dealer |
03-18-2013, 07:11 PM | #6 |
Captain Drives: 2008 Montego Blue 335i Join Date: Mar 2012 Location: Atlanta/Lawrenceville | Of course they are serious. It's a BMW stealership... It will be the most expensive quote out of any shop to fix a problem. Just take it somewhere else or DIY. |
03-18-2013, 07:58 PM | #7 |
Lieutenant Drives: f10 535i, e90 325i, e70 X5 Join Date: Dec 2011 Location: Michigan, USA | Quote: Originally Posted by MSimeon are they serious? or are they dicking with me? isnt that just the gasket on the top part of the engine where the plastic oil filter cap meets the oil filter housing? that part is like .50 cents. this is BS right? I paid around $500 from the dealer, $965 is way to high. |
03-18-2013, 08:09 PM | #8 |
Second Lieutenant Drives: '11 328it Join Date: Feb 2013 Location: Madison, WI | Oil filter gaskets have been an an issue since the 80s and they STILL haven't figured it out?? Same with water pumps!! Mind = BLOWN |
03-18-2013, 08:23 PM | #9 |
Colonel Drives: M3 Join Date: Feb 2012 Location: South Florida/ St. Louis iTrader: (26) Garage List | Quote: Originally Posted by MSimeon are they serious? or are they dicking with me? isnt that just the gasket on the top part of the engine where the plastic oil filter cap meets the oil filter housing? that part is like .50 cents. this is BS right? Do it yourself! I just replaced mine and it was super easy! and it took an hour and cost only $40... gaskets from dealer price! __________________ Evolve, Eisenmann, Strasse, StopTech, Active Autowerke |
03-18-2013, 08:24 PM | #10 |
Lieutenant Drives: 08 335i e92 AW MT Join Date: Feb 2011 Location: Austin | Quote: Originally Posted by Cbozz Quote: Originally Posted by MSimeon are they serious? or are they dicking with me? isnt that just the gasket on the top part of the engine where the plastic oil filter cap meets the oil filter housing? that part is like .50 cents. this is BS right? Do it yourself! I just replaced mine and it was super easy! and it took an hour and cost only $40... gaskets from dealer price! 335i takes way longer than 1hour. |
03-18-2013, 08:26 PM | #11 |
Major Drives: 2008 BMW red 335i coupe Join Date: Jan 2013 Location: springfield, mo | Quote: Originally Posted by Cbozz Do it yourself! I just replaced mine and it was super easy! and it took an hour and cost only $40... gaskets from dealer price! I was quoted $450 from an indy because the book called for 4.5hrs When you say it was SUPER EASY, what kind of tools and jack were at your disposale? __________________ JB4 G5, VRSF catless DPs, FMIC, BMS DCI, Muffler Delete, Alpina B3 Flash, RB Turbos, BB Race Flash |
03-18-2013, 08:27 PM | #12 |
Lieutenant Drives: 08 335i e92 AW MT Join Date: Feb 2011 Location: Austin | Quote: Originally Posted by Lifted07Duramax I was quoted $450 from an indy because the book called for 4.5hrs When you say it
was SUPER EASY, what kind of tools and jack were at your disposale? It is NOT super easy. I would put it a step or two above a brake change. Its not impossible but it probably will take someone who has never done it around 4 hours. It should take a BMW tech 2. |
03-18-2013, 08:39 PM | #13 |
Colonel Drives: M3 Join Date: Feb 2012 Location: South Florida/ St. Louis iTrader: (26) Garage List | Quote: Originally Posted by fenixxishot It is NOT super easy. I would put it a step or two above a brake change. Its not impossible but it probably will take someone who has never done it around 4 hours. It should take a BMW tech 2. are we talking about oil housing gasket and oil cooler gasket replacement...? if so it is really easy.... and it takes about an hour.... if you are mechanically inclined, sorry but I just replaced mine and that's how long it took... I don't know how long you spent on it! You're right though, not everyone will work at the same pace!! As for you Lifted07Duramax look up the DIY... I think this is the right one if you have N54 engine //www.e90post.com/forums/showth...housing+gasket //www.e90post.com/forums/showth...ing+Gasket+DIY //www.e90post.com/forums/showthread.php?t=632565 __________________ Evolve, Eisenmann, Strasse, StopTech, Active Autowerke |
03-18-2013, 08:43 PM | #14 |
Major Drives: 2008 BMW red 335i coupe Join Date: Jan 2013 Location: springfield, mo | Yea mines leaking but barely. Ive owned the car over 2 months and on my cover undearneath theres probably only a 1/10th of a quart on it. Is draining coolant and oil completely necessary? __________________ JB4 G5, VRSF catless DPs, FMIC, BMS DCI, Muffler Delete, Alpina B3 Flash, RB Turbos, BB Race Flash |
03-18-2013, 10:13 PM | #15 |
First Lieutenant Drives: E92 335I BSM Join Date: Feb 2007 Location: San Bruno CA | from the looks of it, it doesnt look like it's AT ALL leaking anywhere. it just looks like oil junk. i should take a picture of it. BMW even said that it was barely leaking any oil and that i shouldnt worry about it right now. but $965? thats ridiculous. __________________ Ordered 4-25-07 Delivered 7-20-07 E92 335i black sapphire metallic, sport, premium, and Navi. JB4, K&N Drop in, Matte Black Window Trim. Linea Corse Dyna 19x8.5F 19x10R Previous Ride: 2004 Silverstone 350Z enthusiast. APS TT *Built Motor* at 12PSI. 467rwhp and 413 rwtq. Tuned at ZCARGARAGE. (Missed, but never forgotten) |
03-18-2013, 11:35 PM | #16 |
Gunny Drives: '07 E90 335i 6MT, 2016 F10 535 Join Date: Sep 2007 Location: San Diego, CA | Oh wow! I bought the 2 gaskets (oil filter housing and oil cooler attachment on the front part of that) for about $12 to $15 each from my dealership parts store. I replaced them using my own hand tools and a DIY in here in my garage while at the same time doing an intake valve cleaning. It took all day, but not very difficult... Especially the gaskets... That was easy and didn't take that much time. It was messy because of oil and coolant spilling out and then the need to top off the coolant and bleed the coolant system. But fairly easy overall. Just do your homework to prepare yourself first if you are thinking about doing it yourself for about $30. __________________ |
03-19-2013, 03:07 AM | #17 |
RemovedUser Guest | I would drain a small amount of coolant, then just top it off to prevent it spilling all over the place and possibly into the oil system. |
03-19-2013, 05:09 AM | #18 |
Lieutenant General Drives: E90 & Z4 Coupe Join Date: May 2012 Location: MARLAND | I did this repair on the N52, so I'm not familiar with the N54 job; but the engine oil filter housings are similar in design for both engines so I can offer some insight regarding the work. I'm assuming the oil cooler on the N54 makes the job a bit more difficult, but not impossible. The gaskets are not that expensive. You'll need a 1/4-drive ratchet, e-torx socket set, a 1/4-drive universal, and a 6" 1/4-drive extension bar (to get to one of the hold-down bolts under the intake manifold). You should only do this job when at an oil change so the engine is drained of oil and the filter housing is empty also; the oil filter housing holds about 6 - 8 ounces of oil that needs to be siphoned out. You should also drain about 1 to 1 1/2 gallons of coolant from the system so that the coolant level is below the level of the oil filter housing. And you should also remove the coolant lines from the oil filter housing (you don't really have to) to make it easier to clean off the gasket material and reassemble the housing onto the head without influence from the hose being attached. Having the hose unattached will allow you to properly seat the new gasket by torquing down the bolts in an even sequence (like torquing down wheel bolts). You can reuse the coolant if it is not that old and if you strain it through a shop towel when refilling the system. The bleed procedure for the cooling system is super easy on these cars thanks to the electric water pump. To do the job safely, the car should be on four (4) jackstands, so at can’t roll off just two of them. If you are going to work underneath of any car, it should always be completely off the ground; wheels that are not in contact with the ground cannot roll. Considering the price of this repair at the dealer or an Indy, you can buy a decent set of four jackstands and a long low-saddle floor jack and still save money in the long run and have the necessary tools to properly lift the car for future maintenance and repairs (and live to tell about it Sorry for the Parent-rant, but there is no reason to die over a $15 oil gasket. Last edited by Efthreeoh; 03-19-2013 at 05:20 AM.. |
03-19-2013, 10:44 AM | #19 |
k Drives: 2008 335i Join Date: Nov 2011 Location: Seattle | Dude on the N54 you have to pull the intake manifold to replace the gasket, $965 is all labor the gasket is pretty cheap. __________________ 2008 335i - 6 spd - Sedan - Mostly stock |
03-19-2013, 06:44 PM | #20 |
Lieutenant Drives: F10M5 Join Date: Oct 2005 Location: P.Pines, FL | Quote: Originally Posted by Jeremy Dude on the N54 you have to pull the intake manifold to replace the gasket, $965 is all labor the gasket is pretty cheap. Correct. But The intake manifold does not need to be all the way off just a few inches so you can get the third filter housing bolt out. The only way I found to drain the coolant is to remove the intercooler to get to the radiator drain screw. Also don't forget the thermostat housing gasket. Not hard if you are somewhat mechanically inclined and not easily intimidated. You will also need to run the coolant pump 12 min cycle to purge the air. __________________ More power please |
03-19-2013, 11:23 PM | #21 |
Major Drives: 2008 E 90 Join Date: Mar 2012 Location: CALIFORNIA | Quote: Originally Posted by MSimeon are they serious? or are they dicking with me? isnt that just the gasket on the top part of the engine where the plastic oil filter cap meets the oil filter housing? that part is like .50 cents. this is BS right? Take it to an indy shop, should be far less cost. |
03-20-2013, 12:13 PM | #22 |
First Lieutenant Drives: 2014 F30 Msports Join Date: Jul 2008 Location: Orlando, FL | I paid around $700 for this. Most of it was labor and part was only $56. I know it was ripoff but my extended warranty company was covering it so I didn't care. |