These 4.7L rebuild kits only use high-quality, name brand parts such as Federal Mogul, Silvolite, Hastings, Cloyes, Clevite, Topline, Elgin, King, Perfect Circle, and Melling. Our supplier has been remanufacturing quality Gas & Diesel Engines for over 25yrs and they use these exact same parts. They wouldn’t offer 3yr/100k (gas) and 3yr/200k (diesel) warranties on their engines if they didn’t believe in the quality of these parts. Show Full Gasket set includes:
NOTES:
Its important that you use the correct “crankshaft” tone ring with its corresponding “camshaft” tone ring with engine as they do NOT interchange and they are specific to the PCM’s as well. The easiest way to get it right is to re-use the passengers side cam sprocket/tone ring that came with the engine you are replacing. OR insure you order the correct timing set up for the YEAR of that vehicle. If you use the wron Example: You can NOT use the Camshaft tone ring from a 2007 NGC engine on a 1999 JTEC engine. If you do it will NOT run! Our CrankShaft Tone Rings allow you to pick any 1999-2007 engine and replace what ever year your needing to replace simply by changing out the tone ring to match your PCM!If you need more help please feel free to contact us. This kit is intended for both the 4.7L JTEC & NGC engines. Typically the JTEC engines are found in PRE-2003 Jeeps, Rams, Dakotas & Durangos. The NGC engines are found in 2003-UP Jeeps, Rams, Dakotas & Durangos. Customer must verify their year make model. Make ANY 1999-2013 4.7L work on ANY year block by changing the crankshaft tone ring! With our AIRRAM crankshaft tone rings you can take ANY 2003-2013 engine and install it into your 1999-2002 vehicles or put any 1999-2002 engines and install it into any 2003-2007 vehicles! All you need to do is swap in the correct 16-tooth or 32-tooth crankshaft tone ring to match the PCM (NGC or JTEC)operating the vehicle and it will run as long as the correct camshaft tone ring is used of course! How to determine what tone ring you have at a glance:
The easiest way to identify which engine you have is to locate the PCM and count the plugs. If you have a 3-Plug PCM then you have a JTEC 16-tooth crankshaft tone ring. If you have a 4-plug PCM then you would have the NGC 32-tooth PCM. Please make sure you select either NGC or JTEC PCM so we can insure the correct timing set is shipped with your kit the first time. CarParts.com will be back soon!We apologize for the inconvenience. The CP Team is working on some upgrades to improve our service. Thank you for using CarParts.com! You can call us at 1-866-529-0412 Reference ID: 18.6ef06e68.1665708849.37e6bc2 DNJ Master Engine Rebuild Kit Includes: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump. Engine Details: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, w/o HI-OUTPUT, Master Kit, w/o Hi-Output w/o Locating Tang. Brief Fitment Information: [2002-2003] / Dodge / Dakota,Durango,Ram 1500 / Liters: 4.7 / V8 / Valves: 16 / VIN: N. Part Warranty: 12 month or 12,000 mile warranty whichever comes first. Warranty must be requested by the original purchaser and is limited to the replacement of the alleged defective part(s) only.
Are rebuild kits worth it?The biggest advantage of buying an OEM rebuild kit is that it contains the same parts your engine was built with, so you know they're all good quality parts. You can buy parts for a repair and know that they will fit correctly. This gives you peace of mind, since rebuilds can easily get expensive.
What does an engine rebuild kit consist of?Most rebuild kits will include things like gaskets and seals, bearings, freeze plugs, and piston rings. More comprehensive kits may add in pistons, oil pumps, and even a camshaft and valvetrain parts.
How much horsepower does a 2003 4.7 RAM have?Used 2003 Dodge Ram Pickup 1500 SLT Specs & Features. How much does an engine rebuild kit cost?The cost of an aftermarket engine rebuild kit may range anywhere between $20 and $950. Several factors can affect its pricing, such as material, brand, warranty, and kit inclusions. If you're hiring a mechanic to rebuild your engine, you may have to spend an additional $500 to $2,000 for labor.
|